-
- 20f
Portable office container 20FT
- 6,055 x 2,435 x 2,800 mm
- Ask about aviability
-
- 20f
Pressure Test Container 20FT
- These cabins are designed to meet the safety requirements of the DNV 2.7-1 Standard, ensuring the container's quality and performance. Measuring L 20’ x W 8’ x H 8’6”, these cabins have a compact size, providing flexibility and convenience in remote locations.
- Ask about aviability
-
- PRV
Metnor Pressure Relief Valves
- Used to control or limit the pressure in a system or vessel which can build up by a process upset, instrument or equipment failure. Pressure is relieved by allowing the pressurized fluid / gas to flow from an auxiliary passage out of the system. The relief valve is designed or set to open at a predetermined set pressure to protect…
- Ask about aviability
-
- PSV
LESER Type 441, 442 DIN
- Flanged safety valves with high throughput depending on their size. With their large nominal widths, pressure levels and additional equipment, they have proven themselves to be universal valves.
- Ask about aviability
-
- PSV
TAYLOR T-8200 32/100 BAR
- Taylor Valve 8200/8300 Safety Relief Valves are engineered and manufactured to the highest standards and feature a “state-of-the-art” soft seat which gives you a bubble-tight seal for hundreds of “pops”.
- Ask about aviability
-
- Test Gauges
Keller Pressure Gauges
- The high precision of the LEX1 digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).
- Ask about aviability
-
- Test Gauges
Crystal Digital Pressure Gauge
- Ultra rugged, intrinsically safe, digital test gauge with 0.1% of reading, 0.02% of full scale, or 0.05% of full scale accuracy levels.
- Ask about aviability
-
- Bolt Tensioning
Bolt Tensioning Pump
- Corrosion resistant frame works well for applications near salt water. Standard flow ideal for land based (topside) tension applications where the required power source is compressed air. Max Working Pressure 21750 PSI
- Ask about aviability
-
- Manual Torque
Manual Torque Wrench TWM
- The TWM range of industrial manual torque wrenches offers 7 models with torque capacities from 10 to 850 Nm (7 to 630 lbf.ft) with square drive sizes from ⅜” to ¾”. All models are designed and manufactured to meet or exceed the highest demands of industry and are marked with a unique serial number and supplied with a calibration certificate.…
- Ask about aviability
-
- Pressure Test Equipment
Hand Pump SKF
- The 729124 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 54E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14 500 psi) is required. The pump is supplied with 1 500 mm (59 in.) pressure hose, quick connect coupling and mating nipple and pressure gauge.
- Ask about aviability
-
- Pressure Test Equipment
Pressure Test Pump AHP275
- The Hi-Force AHP series of air driven hydrostatic pressure testing pumps offer a choice of eight models with output pressure capacities ranging from 6 bar (87 psi) to 2931 bar (42500 psi). All models are suitable for use with various fluids, including water and are supplied with a 150 mm diameter glycerine filled hydraulic pressure gauge (calibrated on request), inlet airline…
- Ask about aviability
-
- Pressure Test Equipment
Pressure Test Pump AZ1
- Air operated, hydraulic pumps for pressure testing, chemical injection and hydraulic power.
- Ask about aviability
-
- Pressure Test Equipment
Pressure test pump “DUAL” by MGF
- Pump for testing and pressurization of hydraulic circuits DUAL by MGF. Equipped with double valve for testing and draining. Maximum pressure 60 bar
- Ask about aviability
-
- Pressure Test Equipment
Hand Pump HP4000
- Completely assembled and ready for immediate use hand lever pump for hydraulic pressures up to 4000 bar
- Ask about aviability
-
- Pressure Test Equipment
Hand Pump P55
- Single Speed Hand Pump for Single Acting Cylinders - 55.000 in³ Oil Capacity, 10000 psi Max Pressure, 0.160 in³ Max Volume per Stroke, 2-Way Valve
- Ask about aviability
-
- DHDA pump
DHDA Pump DA118
- Air operated, high flow, double acting hydraulic pumps for pressure testing, chemical injection and hydraulic power.
- Ask about aviability
-
- Recorders
Rototherm Chart Recorders 0-200 bar
- This Rototherm Clearscan 12” mechanical chart recorder (single pen, 0-200 Bar pressure range) with ½” NPT male connection is a low maintenance instrument built for rugged conditions and designed for flexibility, which can be installed and calibrated simply and quickly maximising your productivity.
- Ask about aviability
-
- Recorders
Metnor Chart Recorders 0-2000bar
- Metnor offers two rental options to record pressure testing results. The well known, tried and tested analogue chart recorder available both in pressure (upto 30,000psi) and temperature with 1% accuracy or the digital NVision Recorder. The NVision has an accuracy of 0.025%, built in temperature monitoring with all information able to download to a PC.
- Ask about aviability
-
- Industrial Camera
Snake Eye 3
- The SnakeEye III Base Kit W (wand and LED camera) is ideal for visual inspection of hard-to-reach areas with access greater than 1.1 in (27.9mm). The SnakeEye III is a hand-held, electronic appliance that incorporates the latest in remote visual inspection technology. It will provide years of reliable service when properly operated and maintained. The SnakeEye III records both still…
- Ask about aviability
-
- Industrial Camera
Helitech PHD-4
- The PHD-4 sniffer leak detector is a lightweight and rugged sniffer, sensitive to helium concentrations as low as 2 ppm – equivalent to a leak rate of 5 x 10–6 atm-cc/sec, far superior to bubble-testing, dye penetrants, and pressure decay. The sensitivity of the PHD-4 is enabled by Agilent’s proprietary and patented SIPD (Selective Ion Pump Detection) technology. With automatic startup,…
- Ask about aviability
-
- Industrial Camera
Flexiprobe P340
- With the weatherproof P340 flexiprobe controller, colour footage is displayed in digital quality on the bright 8” industrial TFT screen. The P340+ controller option has an internal Li-Ion battery, providing power for a full day of typical use.
- Ask about aviability
-
- Bolt Tensioning
Bolt Tensioning SRT
- The design of the Bolting Systems SRT series spring return bolt tensioner dramatically increases productivity and safety on the job site when compared to obsolete manual return tensioners.
- Ask about aviability
-
- Hydraulic Torque
Torque Pump Enerpac
- Two Speed, Air Hydraulic Torque Wrench Pump, 6,6 litres Usable Oil
- Ask about aviability
-
- Hydraulic Torque
Torque Pump SPX RWP55
- 700 BAR (10,000 PSI) Classic Air Hydraulic Pump The RWP55-BS has been the market leading pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse.
- Ask about aviability
-
- Hydraulic Torque
Torque Pump Jetpro
- A series of silent (69 dB) air-cooled electric pumps for the continuous use of one tool. The compact design and simple controls make the pump operation fast and easy and with optional automatic functions the usability is enhanced even further.
- Ask about aviability
-
- Hydraulic Torque
Torque Pump HTWP3140
- All models are 700 bar maximum working pressure, fitted with an easily accessible and adjustable torque setting pressure relief valve, and are available as air driven or electric driven pump units. All pumps are supplied with a remote operation, push button hand pendant controller with 3 metres of control line cable. Glycerine filled, easy to read, dual scale (0-700 bar/0-10,000…
- Ask about aviability
-
- Bolt Tensioning
Bolt Tensioning Aquajack® SUBSEA
- Hydratight’s Aquajack® subsea tensioners allow divers to perform the tensioning process with tools designed specifically for their unique requirements. Aquajack® tensioners feature a compact design and long piston stroke. The unique Split Nut® design of these tools allows rapid application to long bolts and damaged threads, and rapid tool removal.
- Ask about aviability
-
- Hydraulic Torque
Hydraulic Toqrue Wrench TWSD
- Light weight, high strength tool features superior torsional strength, fast operation cycle, fine tooth pawl and floating piston design.
- Ask about aviability
-
- Hydraulic Torque
Hydraulic Toqrue Wrench TWHC
- The Bolting Systems TWHC series torque wrench is designed for high cycle quality. Intently constructed for a cycle life two to three times longer than existing technology.
- Ask about aviability
-
- Hydraulic Torque
Hydraulic Toqrue Wrench XLCT
- The XLCT is one of the world’s best-selling limited clearance industrial bolting system with over one hundred thousand in use around the world. Since 1992, the signature red housing has represented quality, durability, and reliability on job sites in every major industry. From the tallest roller coasters to the world’s largest bridges, the XLCT has the power to get the…
- Ask about aviability
-
- Hydraulic Torque
Hytorc MXT
- HYTORC MXT is the world’s best-selling industrial bolting system with over one hundred thousand in use around the world. Since 1990, the signature blue housing has represented quality, durability, and reliability on job sites in every major industry. From the tallest roller coasters to the world’s largest bridges, the MXT has the power to get the job done.
- Ask about aviability
-
- Manual Torque
Hytorc avanti 20
- The AVANTI hydraulic torque wrench introduces a major technological advance in addition to those of the MXT: the “Coaxial Reaction” system in the axis of the square. It eliminates internal torsion in the wrench frame and, most importantly, it allows the wrench to work without a reaction arm for optimum safety. This allowed him to quickly conquer the market with…
- Ask about aviability
-
- Manual Torque
Manual Torque Wrench HTW1000B
- Hi-Force HTW industrial manual torque wrenches offer output torque capacities ranging from 300 to 1000 Nm (200 to 750 lbf.ft) with repeatable accuracy of +/- 4% and ¾” square drives. All HTW break-back type models provide a large break angle, to prevent the possibility of over torqueing. The cam control of the internal mechanism will ensure a controlled “break” once…
- Ask about aviability
-
- Electrical
Air Compressor Ingersoll
- Boosting your company's profits was the main goal that Ingersoll Rand had in mind when it designed the revolutionary UP-Series line of integrated rotary screw air solutions. The UP-Series is more than an integrated air system, it's a complete air solution designed to maximize the key drivers of profitability in today's business. *Note: Package dimensions and weights in specifications are…
- Ask about aviability
-
- Electrical
G-TEC 18.510-500 DF
- The G-TEC compressor is a full feature complete compressed air station. All of the individual components that would form a normal and very complex system, are assembled conveniently in to this one modular system, saving space and improving efficiency. The exceptionally low noise level means G-TEC can be installed directly in to the work place. The compressor, refrigerated dryer, dual filtration, singular condensate drain,…
- Ask about aviability
-
- Diesel
Air Compressor Irmair 5.5
- The IRMAIR 5.5 compressor has a single-stage, screw, oil-filled compressor element manufactured by Atlas Copco Airtec (Belgium-Sweden), driven through a flexible rubber all-in-one coupling from a Deutz diesel engine (Germany). The engine-compressor bundle is mounted through rubber vibration supports on a solid base and closed with a durable weatherproof and noise-absorbing casing. The casing opens high up for easy access…
- Ask about aviability
-
- Diesel
Air Compressor M-38
- Use the ERA equipment CO2 Calculator to estimate the carbon footprint per hour of use of the Kaeser Mobilair M 38 or alternative Portable Air Compressors - Diesel, Electric, Gasoline. The emission analysis can be carried out considering different energy consumption scenarios or other factors.
- Ask about aviability
-
- Diesel
Air Compressor PA-50
- The PA-50 screw diesel compressor is equipped with a powerful Japanese KUBOTA engine, which provides the declared performance even in the most adverse operating conditions. To generate compressed air on construction sites, quarries and mines, during road surface repairs and in other places where there is no electricity, DALGAKIRAN has developed a line of screw diesel mobile compressors of the…
- Ask about aviability
We have over 60 years of combined experience able to help you 24 hours a day
- sales@spektrgroup.az
- AZ 1063, Bakı şəhəri, Qaradağ rayonu, Salyan şossesi, 15-ci km
- Həftə içi 08:00 - 17:00
Müəlliflik hüququ © 2023, Spektr Group. Bütün hüquqlar qorunur.