These cabins are designed to meet the safety requirements of the DNV 2.7-1 Standard, ensuring the container's quality and performance. Measuring L 20’ x W 8’ x H 8’6”, these cabins have a compact size, providing flexibility and convenience in remote locations.
Used to control or limit the pressure in a system or vessel which can build up by a process upset, instrument or equipment failure. Pressure is relieved by allowing the pressurized fluid / gas to flow from an auxiliary passage out of the system. The relief valve is designed or set to open at a predetermined set pressure to protect…
Flanged safety valves with high throughput depending on their size. With their large nominal widths, pressure levels and additional equipment, they have proven themselves to be universal valves.
Taylor Valve 8200/8300 Safety Relief Valves are engineered and manufactured to the highest standards and feature a “state-of-the-art” soft seat which gives you a bubble-tight seal for hundreds of “pops”.
The high precision of the LEX1 digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).
Corrosion resistant frame works well for applications near salt water. Standard flow ideal for land based (topside) tension applications where the required power source is compressed air. Max Working Pressure 21750 PSI
The TWM range of industrial manual torque wrenches offers 7 models with torque capacities from 10 to 850 Nm (7 to 630 lbf.ft) with square drive sizes from ⅜” to ¾”. All models are designed and manufactured to meet or exceed the highest demands of industry and are marked with a unique serial number and supplied with a calibration certificate.…
The 729124 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 54E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14 500 psi) is required. The pump is supplied with 1 500 mm (59 in.) pressure hose, quick connect coupling and mating nipple and pressure gauge.
The Hi-Force AHP series of air driven hydrostatic pressure testing pumps offer a choice of eight models with output pressure capacities ranging from 6 bar (87 psi) to 2931 bar (42500 psi). All models are suitable for use with various fluids, including water and are supplied with a 150 mm diameter glycerine filled hydraulic pressure gauge (calibrated on request), inlet airline…
This Rototherm Clearscan 12” mechanical chart recorder (single pen, 0-200 Bar pressure range) with ½” NPT male connection is a low maintenance instrument built for rugged conditions and designed for flexibility, which can be installed and calibrated simply and quickly maximising your productivity.
Metnor offers two rental options to record pressure testing results. The well known, tried and tested analogue chart recorder available both in pressure (upto 30,000psi) and temperature with 1% accuracy or the digital NVision Recorder. The NVision has an accuracy of 0.025%, built in temperature monitoring with all information able to download to a PC.
The SnakeEye III Base Kit W (wand and LED camera) is ideal for visual inspection of hard-to-reach areas with access greater than 1.1 in (27.9mm). The SnakeEye III is a hand-held, electronic appliance that incorporates the latest in remote visual inspection technology. It will provide years of reliable service when properly operated and maintained. The SnakeEye III records both still…
The PHD-4 sniffer leak detector is a lightweight and rugged sniffer, sensitive to helium concentrations as low as 2 ppm – equivalent to a leak rate of 5 x 10–6 atm-cc/sec, far superior to bubble-testing, dye penetrants, and pressure decay. The sensitivity of the PHD-4 is enabled by Agilent’s proprietary and patented SIPD (Selective Ion Pump Detection) technology. With automatic startup,…
With the weatherproof P340 flexiprobe controller, colour footage is displayed in digital quality on the bright 8” industrial TFT screen. The P340+ controller option has an internal Li-Ion battery, providing power for a full day of typical use.
The design of the Bolting Systems SRT series spring return bolt tensioner dramatically increases productivity and safety on the job site when compared to obsolete manual return tensioners.